Stop by & See Us at GoodGuys Show

Mike’s Truck Accessories & Spray-On Bedliner
at the GoodGuys Autumn Get-Together
in Pleasanton, CA
Alameda County Fairgrounds!

AGT - Vendor Button 15

See you there Nov 14 & 15!

Alameda SWAT Monster gets truck accessories & Rhino Liner

The Alameda County Sheriff’s Department SWAT team brought their MONSTER size Armored Truck into Mike’s Truck, the San Francisco Crisis Center for the Bay Area for some work.

Mike’s solved a MONSTER engine overheating problem by installing an air scoop to the hood. They then sealed it all in Rhino Lining making the truck heat & weather resistant for good! This impressive MONSTER truck is fit for battle!

Mike’s Truck & Rhino Linings are dedicated to your truck accessories and bed liner needs. Tailgate with us at the next SF 49er or Oakland Raider game!


Mike’s Truck is GIVING AWAY a PAIR of Club Seats
($800 value) Sharks vs Kings stadium series




 To enter drawing held on FEB 14
SIMPLY do 2 things

1) FOLLOW – Become a Fan to ANY or ALL of the following

Like Mikes Truck Bay Area     

2) Copy & Paste – the line below to your facebook timeline

                      And that’s it! 

Winner’s name to be posted on Facebook Feb 15

See PHASE I here:

Now that the first phase has been completed – which was to remove external truck accessories, bumpers, mirrors, door handles, etc. Followed by sand blasting, sanding, welding, replacing and renewing any body damage. Including completely cutting off the huge portions of rusted out drip rail and then welding in a new (recycled) drip rail that we found on another van at a parts yard.

The body was then sealed in light gray coating as the primer. Mike’s Truck uses a 100% solids (no air pollution), thermoplastic polyurethane and polyurea. The materials are precisely dispensed through a high pressure polyurethane spray machine. The material is heated to 120-140 degrees with the temperature maintained through a heated hose. Using high pressure, the materials is applied. It takes less than 5 seconds for it to harden. As soon as it lands on the surface it’s dry! If it’s sprayed from too far away, it won’t stick because it will have already dried. Amazing material and process!

Mike’s Truck & Bullet Liner products are a fast-cure, multipurpose series of coatings designed for a wide range of retail, commercial, and industrial uses. They exhibit excellent adhesion to most properly prepared surfaces. There are no solvents associated with these products, which means there are no air pollutants or harmful environmental contaminates.

Mike’s Truck & Bullet Liner Protective Coatings are resistant to most solvents and acids, making them ideal for industrial and commercial applications where corrosion is prevalent. This greatly extends equipment and vehicle life expectancy. It has a high “shore D” hardness rating, offering excellent impact resistance and superior tensile strengths (up to 6,600 psi) resulting in outstanding abrasion resistance. Because the material is sprayed there is a complete seal, making the coating “water tight”.

Mike’s Truck is dedicated to your truck accessories and bed liner needs. Tailgate with us at the next SF 49er or Oakland Raider game!

Shown above: 2011 Toyota Tundra with 35″ with stock Forged TRD wheels
Problem: tires rubbing
Solution: Pro Comp 6″ Lift kit, installed
Turnaround: 3 days

Take your driving experience to the next level!

Pro Comp makes products that deliver results. Pro Comp Lift Kits will not only improve the drivability but will also enhance the maneuverability. Top rated for longevity, durability, and reliability. Pro Comp’s team consists of expert engineers that have the most experience and knowledge. Pro Comp Lift’s are used by professionals, enthusiast, and every day drivers. Pro Comp uses the most durable materials and product that will transform any vehicle.

Mike’s Truck of Bay Area installs ProComp products. Pro Comp Suspension is a recognized worldwide leader. Pro Comp Lift Kits are considered the most dependable and durable kits that will give any vehicle a smoother ride for years to come. Pro Comp Lifts began in 1992 and are now considered the top aftermarket manufacturer in the suspension category.

When it comes to your vehicles handling, look and performance, Mike’s Truck  truck accessories will get you customized RIGHT!
Call Mike’s today for your best custom solution.

Mike’s Truck of Silicon Valley partners in local Safeway promotion

Big brands such as Pepsi and NFL promote tail-gating events and they invited us to participate in this one. NOW that the South Bay is the NEW HOME of 49’er madness!! There’s a whole new electricity in the air!

The NEW Safeway [in South San Jose] has taken things one step further — and we are happy to be a part of that! – by promoting Bay Area teams with a brand new ‘Tail Gate Store’ located right inside Safeway! You will see the display has Mike’s Truck of Silicon Valley Bed liner!

But Mike’s Truck isn’t about just  bed liners. Did you know Mike’s Truck also carrys a line of outstanding truck accessories? Yup, it’s true!

• Get your DC to AC converter for your electric cooler or electric burner to keep food hot and drinks cold.
• Keep your tailgate party protected from the wet weather with a Truck Cover.
• Get a hitch installed and tow your BBQ! or custom party trailer!

Mike’s Truck sells and installs over 20,000 truck accessories – If it goes on a pickup, van or SUV we have it. We install it! We guarantee it!

Be sure to stop by Safeway for your tailgate supplies and don’t forget to get your truck bed LINER-ed before the next game!

And LOOK FOR Mike’s Truck of Silicon Valley at the next 49’er or Raider game at TAILGATE time — we’ll have FREE STUFF!

Subscribe to this blog.
Share us on Facebook and Twitter.

Mike’s Truck & Spray-On Bedliners Bay Area permanently resolved a leak in the roof of a University of Santa Clara Team Bus.

The University of Santa Clara Team bus had leaked before and the solution was to apply caulking to the seam – you can see in the photos – the line that runs the length of the roof. To properly fix the leak, all of the caulking had to be removed and the roof scuffed. Then the entire bus was masked off to protect any areas from overspray.

Polyurea is THE PERFECT SOLUTION for water-proofing because it is SIX TIMES more flexible than caulking and can be stretched 600% without failing. Guaranteed to not leak! PERFECT for the roof on a rolling, flexing bus or any RV roof repair.

As you can see, this is a very large size job, but we have the facilities to accommodate! The bus was brought into our 35 foot spray booth so that the material is sprayed in one application. After it’s sprayed it takes just a few seconds for the material to dry. It dries solid and seals out any moisture. It’s a thick indelible finish that will NEVER leak again!

Do you have something that needs to be protected from the elements?
Seal out leaks with one application of Polyurea!

Brand new $60k commercial work truck and the ceiling leaks soaking expensive tools and supplies. What? Work truck roof repair is required immediately. This vehicle is out of commission until this is resolved.

RVs and trucks similar to this have roofs that are designed to walk on – for viewing or holding extra equipment. The roof area, introduces a couple new challenges.

Most important the roof must be a waterproof. Second, it should provide some slip resistance. It is dangerous to walk on a roof that is wet and third, with all the flexing an RV or truck is subjected to going down the road it must not crack or peel. Last, it should add support when people are standing on it.

Maintaining a waterproof, slip resistant roof able to stand up against extreme temp changes requires new technology.
Roof Leaks

To solve the leaking roof we used Polyurea because of the unique properties it presents. For example, excellent adhesion, elongation, and stability under harsh conditions make Polyurea the prefect product to seal and protect an RV or truck roof. Polyurea along with already mentioned properties will also bring stability and adds strength to thin metal sheets.

Completed Roof

To solve the slippery surface Mike’s Truck of Bay Area used “shark bite” that was fused into the Polyurea. The additional grip makes walking on a wet roof do-able. This same technique has been used to coat Rollup Passenger Ramps for both Oakland and San Francisco airports. It was also used to coat foot areas of S.W.A.T vehicles, Crab boats, step bars, K9 Police Cars and Fire truck access areas.

The water leak on this work truck was identified at the support beam welded to the center seam running from front to the back. The entire beam was caulked with waterproof caulk to keep water out at the factory!
Shark Bite Close Up

If you’ve ever been four wheeling, camping in the rain, hunting, cruising the beach, then you’ve gotten your Jeep’s interior dirty dirty. It’s the next day that it hits you – what a mess. How many times have you thought while hosing down the exterior – man, it would be nice to take a hose to the inside as well. That’s a problem with OEM paint. With the OEM paint job starting to rub off leaving any water in the Jeep’s TUB will lead to rust. Many Jeep owners have discovered Polyurea does a great job solving both issues.

Here’s a sequence of photos show the project from beginning to end.

Next time you go online and order your truck accessories, and plan on installing them yourself. Think about this, what happens if you are sent the wrong part, parts missing or worse yet – damaged parts? Best case scenario – the time involved with the project doubles. If you have a problem, we all know the routine – box up the part, ship it back to the manufacturer – wait for the new one and re-install. That is exactly what happened with this Retrax cover install this week. Dent_1
Once the cover was completely installed the installer pulled out the cover and noticed a small dent in the middle of the cover. There is no way one could have discovered the flaw earlier. The customer was expecting their truck in 30 minutes. The customer shows up, I watch them walk around and inspect the cover, try it out a couple times and walk in the shop. Hey the Retrax looks cool and works great! All except for one thing, I told him. I have contacted the manufacturer and they are sending out a replacement. It will be here in a day I will call to setup an appt. The customer asks, “What’s wrong with it?” We walked out and I show him the dent – he was totally amazed that I labeled that a defect as well as had the replacement already on its way.

At Mike’s we aim to exceed our customers expectations. There is a difference with Truck Accessory Shops we hear it from our customers. Stop in let’s get something started, Mike’s has been around for over 30 years. Check our Reviews Silicon Valley Yelp.