Spray-On Bedliners of Silicon Valley Protect Dublin San Ramon Water District’s Containers
When it comes to protecting raw metal, steel, or wood nothing protects like Polyurea. Dublin San Ramon Water Districts just received two new containers. These containers are used to hold the waste when the city cleans the street drains. As one could imagine lots of rocks, sand, and tree branches find there way into city street drains which is hauled away. Because this container would be subject to lots of heavy debris Polyurea is perfect solution. This product has great flexibility and wear properties that will protect the container for years to come.
This job required two half days to complete. The first day was spent prepping the surface. The surface must be free from oil and rust to obtain a near white metal profile for the proprietary primer. The job surrounding site has been protected by heavy tarps to catch any waste or over spray. Once this is all setup the fun begins.
In the above photo all grease has been wiped off and the remaining residue washed with hot soapy water, rinsed with clean water. After the container is completely dry the team uses grinders to remove rust. Once this has been completed the entire area to be coated is primed. The photo below shows the container with primer.
This primer has a re-coat time between 12 – 24 hours. The project was complete the following day. The spec calls for 60 mils on the sides and heavier on the bottom. The bottom photo shows the completed project after removal of paper and plastic covering.
This container is ready for full service the following day. Dublin San Ramon Water District receives the best protection available for their new containers. This protection is far superior than anything on the market today.
Call use today to discuss your commercial water-proofing needs. If it can be sprayed it can be saved… Water-proof with Polyurea!